DIY IKEA Hemnes Pantry Cabinet

How to turn an IKEA Hemnes cabinet in a pantry and give it a custom high-end look with antique mirror window film.

Kitchen Pantry 2.0

That should really be the title of this post.  I know the minimalist lifestyle is cool and all.  And half of the world lives with probably a quarter of the size of our kitchen with no problem.

But y’all!  I don’t know how they do it.  Our kitchen was in dire need of better pantry storage, so I decided on a do-over.

Maybe it’s because we entertain a lot and cook 95% of our meals at home.  We’ve made it work up until this point by stuffing chip bags, canned goods, and ingredients on two little shelves in our laundry room cabinet.  I even came up with a handy dandy storage system in an upper kitchen cabinet.

After a year, it still wasn’t working.

And the more we thought about it, the more we realized this coffee bar on the far wall of our kitchen really wasn’t being utilized to its full potential.

So… plot twist!  We hauled that baby outta here.

Also, spoiler alert: If something isn’t functioning well for you and your family in your home, don’t be afraid to change it.  What’s so great about something looking pretty if it’s wasting space?

On to Plan B, which entailed putting together a bajillion and a half IKEA pieces to build two IKEA Hemnes cabinets.

DIY IKEA Hemnes Pantry Cabinet

Supplies Used:

(Some affiliate links are provided below. Full disclosure here.)

• 2 IKEA Hemnes glass front cabinets
• Kilz Adhesion Primer
• Cabinet/trim enamel paint in color of choice (We used Behr Marquee enamel satin paint in the color Sherwin Williams Billiard to match our lower kitchen cabinets.)
• Paint brush (I prefer 1 1/5″ angled Purdy brushes)
• Masking liquid (optional but highly recommend)
• Antique mirror window film
• Spray bottle with water and 8 drops of dish soap
• Scissors
• Sharpie
• Credit card or squeegee
• X-acto knife
• Paper towels or clean, dry rags

The Steps:

1. Find someone who will geek out at putting the cabinet together for you. Just kidding.  Kind of.  Robert loves putting together IKEA furniture, and I think he’s a total weirdo for it.    According to him, they’re like giant LEGO.  Whatever you gotta tell yourself, man.

2. Follow these steps for painting IKEA furniture to prevent scuffs and chips.  Laminate is tricky business to paint.

The key is definitely a good primer like Kilz Adhesion.

3. Once the primer and paint dried on the cabinet, I did the same thing on the glass front cabinet doors.

BUT little tip that I wish I hadn’t skipped:  Brush masking liquid on the glass before painting.  I’ve used it for painting French doors before (you can see the how-to here) and it makes painting around glass so much easier and faster.  Just peel the masking liquid off of the glass once it’s dry, and the paint pulls right up with it.

I painted the glass doors thinking I would just scrape up the paint on the glass with a razor later for a clean edge. Nope!  That stuff was on there.  (This is why I’m the guinea pig, y’all. Taking one for the team here. Welcome to life as a blogger making it up as we go.)

So I had to do the next step with dried paint still stuck on the glass, and it made the job a tad tricky.

4. To hide all of the food that will be stored in the cabinets later, I found this window film that looks so much like a real antique mirror finish!

I knew it would tie in our stainless steel appliance colors on the cabinet with the rest of the kitchen as well as bounce light from the window on the opposite side of the room to brighten up this dark interior wall.

You can follow this video to install the film if you need a better visual.

5. First, measure the width and height of the glass panel on the cabinet front and add 1 inch to each measurement.

6. Mark the measurements on the backside of the film with a Sharpie and cut with scissors.

7. Lay the film on a flat surface and slowly peel off the backing as you spritz the film with the spray bottle of water/soap solution.  Fully saturate the film.

8. Spray the glass on the cabinet door with the water/soap solution too.

9. Position your window film onto the glass and smooth out any air bubbles starting from the middle and working your way out to the edges with the credit card or squeegee.

10. Trim any excess film with a sharp X-acto knife.  And wipe up any residual water/soap solution with a towel.

Ta da! All done.

I’m still working on getting food moved over from various places all over the kitchen into these cabinets so that it’ll all be in one place.  And hopefully I’ll have a pretty organized system soon once I can wrap my brain around it.

It ties in with our kitchen cabinets so perfectly!  And I love that one day when we have the funds to replace this flooring that we won’t have to demo these cabinets since they aren’t built in.  They are anchored though (which you should always make sure you do).

They look downright fancy for IKEA, huh?

If you’re new around these parts and want to see more of our kitchen refresh from last year, you can check it out here.

Or if you’re an IKEA fanatic like we are, you can check out this post for all kinds of ideas to make IKEA items look designer-y.

So I’m curious, what do y’all do for your pantry situation?  Got any great organizing solutions that work for you?  The inside of these cabinets aren’t nearly as pretty as the outside at the moment, but we’ll get there.

If you want to save this post for later, you can pin it here:

The post DIY IKEA Hemnes Pantry Cabinet appeared first on Bless'er House.